随着监控助理突然提示很多数据库连接错误:
排查数据库错误便随之提上了日程。
重启大法
不得不说,有时候重启大法还是挺好使的。所以我们上来也尝试重启mysql
$ /usr/local/etc/rc.d/mysql-server stop
$ /usr/local/etc/rc.d/mysql-server start
再次连接,数据数据直接就连不上了。此时便需要来到正确的轨迹上:看报错内容,根据报错内容来排查原因,解决问题。
错误日志
很遗憾的是,mysql在启动过程中,即使启动失败,也不会报什么的错误信息。我们查看mysql是否成功启动则需要使用mysql-server status
命令:
root@YunzhiTest:/usr/home/panjie # /usr/local/etc/rc.d/mysql-server status
mysql is not running.
而是否打印日志,以及日志的位置放在哪,则需要我们进行手动配置。在mysql服务成功启动的前提下,我们其实是可以使用mysql的相关命令来查看当前的配置文件位置的,无奈当前mysql并没有成功启动,所以此时则需要借助一些查询软件或是当初安装mysql使用的工具(比如FreeBSD的ports)来查找mysql的配置文件位置了。在FreeBSD中,mysql的配置文件位于/usr/local/etc/mysql
中:
root@YunzhiTest:/usr/home/panjie # cd /usr/local/etc/mysql/
root@YunzhiTest:/usr/local/etc/mysql # ls
keyring my.cnf my.cnf.sample
然后我们备份一个配置文件cp my.cnf my.cnf.bak
后再对其进行编辑:
[mysqld]
log = /var/log/mysql/mysqld.log
log-error = /var/log/mysql/error.log
user = mysql
port = 3306
在 mysqld 下增加两项:log及log-error,分别存一般日志及错误日志。同时由于当前mysql启动的用户是mysql,还需要保证mysql用户对相关日志路径拥有绝对权限:
$ mdkir /usr/log/mysql
$ chown mysql:mysql /usr/log/mysql
查看日志
此时我们再次启动mysql 服务,则可以查看在/var/log/mysql/下生成的error.log文件了:
$ /usr/local/etc/rc.d/mysql-server start
其比较重要的错误信息如下:
2022-07-11T14:22:25.946391Z 0 [Note] InnoDB: Rollback of non-prepared transactions completed
2022-07-11T14:22:25.946435Z 0 [Note] InnoDB: Setting file '/var/db/mysql/ibtmp1' size to 128 MB. Physically writing the file full; Please wait ...
2022-07-11T14:22:25.947132Z 0 [Note] InnoDB: Progress in MB:
1002022-07-11T14:22:26.085805Z 0 [Warning] InnoDB: Retry attempts for writing partial data failed.
2022-07-11T14:22:26.085855Z 0 [ERROR] InnoDB: Write to file /var/db/mysql/ibtmp1failed at offset 133169152, 1048576 bytes should have been written, only 0 were written. Operating system error number 28. Check that your OS and file system support files of this size. Check also that the disk is not full or a disk quota exceeded.
2022-07-11T14:22:26.085940Z 0 [ERROR] InnoDB: Error number 28 means 'No space left on device'
2022-07-11T14:22:26.085951Z 0 [Note] InnoDB: Some operating system error numbers are described at http://dev.mysql.com/doc/refman/5.7/en/operating-system-error-codes.html
2022-07-11T14:22:26.085968Z 0 [ERROR] InnoDB: Could not set the file size of '/var/db/mysql/ibtmp1'. Probably out of disk space
上述错误大概就是在说一个问题:磁盘空间满了,此问题导致mysql无法启动。
整理数据
问题的根本原因找到了,解决问题便成了最轻松的事情。
root@YunzhiTest:/usr/local/etc/mysql # df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/ufsid/59a7effe7885633c 39G 36G 124M 100% /
devfs 1.0K 1.0K 0B 100% /dev
zroot/mengyunzhi 48G 40G 8.4G 82% /mengyunzhi
zroot 8.4G 23K 8.4G 0% /zroot
首先我们查看my.cnf
中的数据库文件配置路径:
datadir = /var/db/mysql
tmpdir = /var/db/mysql_tmpdir
slave-load-tmpdir = /var/db/mysql_tmpdir
secure-file-priv = /var/db/mysql_secure
然后依次查看其占用空间:
root@YunzhiTest:/var/db # du -h -d 1
180M ./portsnap
3.1M ./etcupdate
8.0K ./zfsd
36K ./entropy
4.0K ./ipf
4.0K ./hyperv
87M ./pkg
688K ./ports
1.5G ./freebsd-update
12K ./ntp
148K ./fontconfig
8.0K ./sudo
18G ./mysql
4.0K ./mysql_secure
4.0K ./mysql_tmpdir
8.0K ./redis
8.0K ./colord
20G .
发现mysql占用了18G,但实际上并没有这么多数据。进入mysql文件夹后继续查看:
root@YunzhiTest:/var/db/mysql # du -ah | sort -h
104M ./log/log.ibd
105M ./log
130M ./mysql/slow_log.CSV
131M ./mysql-bin.000108
136M ./measurement/instrument.ibd
142M ./mysql-bin.000113
145M ./mysql-bin.000104
150M ./mysql
190M ./mysql-bin.000114
214M ./mysql-bin.000111
224M ./mysql-bin.000109
230M ./mysql-bin.000103
256M ./ib_logfile0
256M ./ib_logfile1
256M ./mysql-bin.000106
274M ./mysql-bin.000107
287M ./mysql-bin.000110
344M ./mysql-bin.000102
346M ./instrument
380M ./mysql-bin.000112
404M ./measurement/instrument_check_info_mandatory_instrument_check_ability_list.ibd
502M ./mysql-bin.000120
658M ./mysql-bin.000121
678M ./mysql-bin.000125
786M ./mysql-bin.000116
813M ./mysql-bin.000123
900M ./mysql-bin.000118
1.0G ./measurement
1.0G ./mysql-bin.000115
1.0G ./mysql-bin.000117
1.0G ./mysql-bin.000119
1.0G ./mysql-bin.000122
1.0G ./mysql-bin.000124
1.2G ./switchgear1
1.2G ./switchgear1/record_value.ibd
2.3G ./ibdata1
最终发现空间大户如上,我们发现系统中的.mysql-bin文件占据了较大的空间,而mysql-bin文件大体有两个作用:1是用来进行数据恢复;2是在主从数据库的时保障高可用性。
虽然可以删除相应的mysql-bin文件,但是保留该文档还是有一定的必要性的。但我们可以将其保留的日期缩短一些,比如我们只保留一周的。查看文件的生成日期:
root@YunzhiTest:/var/db/mysql # ls -alh
-rw-r----- 1 mysql mysql 344M Jun 13 17:02 mysql-bin.000102
-rw-r----- 1 mysql mysql 229M Jun 14 13:53 mysql-bin.000103
-rw-r----- 1 mysql mysql 145M Jun 14 20:44 mysql-bin.000104
-rw-r----- 1 mysql mysql 56M Jun 15 00:11 mysql-bin.000105
-rw-r----- 1 mysql mysql 256M Jun 15 22:34 mysql-bin.000106
-rw-r----- 1 mysql mysql 274M Jun 16 11:29 mysql-bin.000107
-rw-r----- 1 mysql mysql 131M Jun 16 17:38 mysql-bin.000108
-rw-r----- 1 mysql mysql 224M Jun 17 04:00 mysql-bin.000109
-rw-r----- 1 mysql mysql 287M Jun 17 17:26 mysql-bin.000110
-rw-r----- 1 mysql mysql 214M Jun 18 03:29 mysql-bin.000111
-rw-r----- 1 mysql mysql 380M Jun 18 21:19 mysql-bin.000112
-rw-r----- 1 mysql mysql 142M Jun 20 17:02 mysql-bin.000113
-rw-r----- 1 mysql mysql 189M Jun 21 00:09 mysql-bin.000114
-rw-r----- 1 mysql mysql 1.0G Jun 22 19:35 mysql-bin.000115
-rw-r----- 1 mysql mysql 785M Jun 24 00:16 mysql-bin.000116
-rw-r----- 1 mysql mysql 1.0G Jun 25 19:06 mysql-bin.000117
-rw-r----- 1 mysql mysql 900M Jun 27 08:14 mysql-bin.000118
-rw-r----- 1 mysql mysql 1.0G Jun 29 11:30 mysql-bin.000119
-rw-r----- 1 mysql mysql 502M Jul 1 13:09 mysql-bin.000120
-rw-r----- 1 mysql mysql 657M Jul 5 01:38 mysql-bin.000121
-rw-r----- 1 mysql mysql 1.0G Jul 6 21:05 mysql-bin.000122
-rw-r----- 1 mysql mysql 813M Jul 8 09:05 mysql-bin.000123
-rw-r----- 1 mysql mysql 1.0G Jul 10 10:36 mysql-bin.000124
-rw-r----- 1 mysql mysql 677M Jul 11 21:28 mysql-bin.000125
发现该文件当前保存了近1个月,此时我们先删除两个稍大的历史文件,把空间释放一些出来,然后再去修改一下my.cnf中的保留日期将其缩短为10天。
root@YunzhiTest:/var/db/mysql # rm mysql-bin.000115
root@YunzhiTest:/var/db/mysql # rm mysql-bin.000124
root@YunzhiTest:/var/db/mysql # df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/ufsid/59a7effe7885633c 39G 34G 2.1G 94% /
devfs 1.0K 1.0K 0B 100% /dev
zroot/mengyunzhi 48G 40G 8.4G 82% /mengyunzhi
zroot 8.4G 23K 8.4G 0% /zroot
将bin文件的保留天数据设置为10:
binlog_cache_size = 16M
expire_logs_days = 10
最后尝试启动mysql
root@YunzhiTest:/usr/local/etc/mysql # /usr/local/etc/rc.d/mysql-server start
Starting mysql.
root@YunzhiTest:/usr/local/etc/mysql # /usr/local/etc/rc.d/mysql-server status
mysql is not running.
其实除此方法外,如果你的第二硬盘空间够用,还可以直接把mysql的数据文件迁移到第二块硬盘上,我只所以没有这么做是由于我第二块硬盘的剩余空间也仅有8.4G,而这个值小于当前mysql的占用空间18G。所以即便是我想进行迁移,也迁移不过去。其根本原因是由于当下有个系统需要上传大量的较大的文件,而我并没有使用存储来处理这些文件,是时候使用存储来专门存放资源文件了。
追踪:虽然将expire_logs_days
的值设置成了10,但mysql在启动的时候并没有自动删除历史的日志,可能还需要在某个时间节点上触发吧,待后续进行追踪。